Fiberlogy FiberSatin filament 1.75, 0.850 кг (1.87 lbs) - green

Technical data and information

The following parameters are only suggested print settings for this material.

To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.

Diameter of filament: 1.75 mm
Dimensional tolerance of filament: +/- 0.02 mm
Oval tolerance: +/- 0.01 mm
Hotend: 200-230°C
Heated bed: 50°C
Closed chamber: not required
Fan: 75-100%
Flowrate: 95-105%
Printing Speed: <60 mm/s
Surface: PEI, glass, masking tape
Retraction (direct): 2-3 mm
Retraction (bowden): 4-6 mm
Retraction Speed: 20-45 mm/s
Drying conditions: 40°C / 4h
Notes: Due to the strong adhesion, damage to the bed surface (eg PEI) may occur. We recommend printing on a tape.

Physical properties	Test method	Unit	Typical value
Specific density	ISO 1183	g/cm3	1.12
Mechanical properties	Test method	Unit	Typical value
Tensile strength @ Yield	ISO 527	MPa	48
Tensile strength @ Break	ISO 527	MPa	50
Tensile modulus	ISO 527	MPa	2500
Elongation @ Yield	ISO 527	%	4
Elongation @ Break	ISO 527	%	9
Flexural strength	ISO 178	Mpa	-
Flexural modulus	ISO 178	MPa	-
Izod Impact strength (Notched) @ 23°C	ISO 180	kJ/m2	4
Thermal Properties	Test method	Unit	Typical value
Heat Distortion Temperature @ 0.45 Mpa	ISO 75	°C	50
Heat Distortion Temperature @ 1.8 Mpa	ISO 75	°C	40
Vicat Softening Temperature	ISO 306	°C	50
Glass Transition Temperature Tg	DSC	°C	55
Meting Temperature Tm	DSC	°C	155-160
Continuous Use Temperature (UL Yellow Card)	UL 746	°C	-

Product descriptions

Fiberlogy FiberSatin makes models look as if they were not a product of a 3D printer.

High layer bondability and the slightly glossy, matte finish conceal the drawbacks of additive printing technology, such as the visible boundaries between individual layers.

FiberSatin can be an alternative to silk filaments for people who look around for an interesting finish in a rather matte and refined version.

In addition to its unique visual properties, FiberSatin is also distinguished by its unique texture.

To the touch, it resembles filaments with the addition of carbon fiber, thanks to which it diffuses the light, giving off a subtle shine.

FiberSatin is as easy to print with as traditional PLA. To achieve a successful printout, it is enough to use the existing Fiberlogy EASY PLA profile or other filament profile from the PLA family.