Fiberlogy PA12 + GF15 filament 1.75, 0.500 kg (1.0 lbs) - natural

Technical data and information

NYLON PA12+GF15

Diameter of filament: 1.75 mm

Dimensional tolerance of filament: +/- 0.02 mm

Oval tolerance: +/- 0.01 mm

Shrinkage of the material: Large

Hotend: 255-270°C

Heated bed: 90-110°C

Closed chamber: not required

Fan: 0-25%

Flowrate: 90-100%

Printing Speed: 35-60 mm/s

Surface: PEI, glass, masking tape

Retraction (direct): 2-3 mm

Retraction (bowden): 4-6 mm

Retraction Speed: 20-45 mm/s

Drying conditions: 80°C / 4h

Notes: The material has highly abrasive properties. We recommend the use of hardened steel or ruby nozzles.
Wear gloves (the possibility of micro damages on the skin). Use a dust mask and protective glasses when processing.

Physical properties	Test method	Unit	Typical value
Specific density	ISO 1183	g/cm3	1.13
Mechanical properties	Test method	Unit	Typical value
Tensile strength @ Yield	ISO 527	MPa	-
Tensile strength @ Break	ISO 527	MPa	72
Tensile modulus	ISO 527	MPa	3100
Elongation @ Yield	ISO 527	%	-
Elongation @ Break	ISO 527	%	8
Flexural strength	ISO 178	Mpa	-
Flexural modulus	ISO 178	MPa	3000
Izod Impact strength (Notched) @ 23°C	ISO 180	kJ/m2	16
Thermal Properties	Test method	Unit	Typical value
Heat Distortion Temperature @ 0.45 Mpa	ISO 75	°C	172
Heat Distortion Temperature @ 1.8 Mpa	ISO 75	°C	155
Vicat Softening Temperature	ISO 306	°C	170
Glass Transition Temperature Tg	DSC	°C	-
Meting Temperature Tm	DSC	°C	178
Continuous Use Temperature (UL Yellow Card)	UL 746	°C	100

Product descriptions

NYLON PA12+GF15
DURABILITY AND RESISTANCE
PA12 + GF15 is another material offered by Fiberlogy, which is a derivative of Nylon PA12. It was created by reinforcing it with glass fiber (GF), which constitutes 15% of the product. This made it possible to significantly increase the durability, stiffness, and thermal and chemical resistance compared to pure Nylon. PA12 + GF15 has a stiffness of 3.6 GPa and a temperature resistance of up to 170°C.

Unlike Nylon with an addition of carbon fiber, available as Fiberlogy PA12 + CF5 and PA12 + CF15, this filament offers greater flexibility, making it ideal for applications operating under variable loads and exposed to impacts.

The very low shrinkage ensures high dimensional stability. This combined with high durability makes engineering excellence achievable at home. This filament does not require a heated chamber. However, due to the high abrasiveness, steel or ruby nozzles should be used for printing in order to prevent excessive wear.