Lynxter GEL-001 gel support for immersive silicone 3D printing with NEST-GEL

How to 3D print Silicone In GEL Suspension

Cure
The material cures at room temperature. The curing process can be accelerated by placing it in an oven at temperatures between 40 °C and 60°C.

Clean
Rinse your part with water directly from the sink.

 Easy and Quick Removal
GEL-001 is designed for fast removal of the support material. The bulk of the gel can simply be removed by hand and then collected for reuse. The part is then rinsed under water while gently brushing it to remove any remaining residue.

Eco-friendly and safe: this simple process does not generate complex waste and allows the gel to be reused, while remaining completely non-hazardous. The wastewater can be safely disposed of down the drain. No mess, no stress!

 Which Silicone Should I use?
Engineered specifically for gel-bath 3D printing, SIL-005 is a silicone formulation that combines the characteristics of a 70 Shore A Liquid Silicone Rubber with a transparent appearance.
It delivers smooth, high-quality surface finishes on printed parts while maintaining excellent mechanical performance.