FormFutura - Platinum series general purpose LCD resin - light grey, 0.500 kg

Technical data and information

Glass transition temperature (Tg): 51°C / ASTM D7028
Water absorption: 0.4% / ASTM D570-98
Impact strength (IZOD notched): 18 J/m / ASTM D256A
Tensile strength: 45 MPa / ASTM D638M
Tensile Modulus: 1000 MPa / ASTM D638M
Elongation at break: 8% / ASTM D638M
Flexural Strength: 66 MPa / ASTM D790M
Flexural Modulus: 1800 MPa / ASTM D2240
Shore D Hardness: 82 / ASTM D2240

*Please note that the above-displayed values can vary with individual machine processing, post-curing parts, geometry, print orientation, print settings, and temperature.

50µm
First / Burn-in Layers: 3x to 4x for 20 to 30 Seconds
Normal Layers: 2.3 to 2.8 Seconds
Lifting Distance: 9mm
Light-off Delay: 1
Bottom Light-off Delay: 3

100µm
First / Burn-in Layers: 3x to 4x for 20 to 30 Seconds
Normal Layers: 4 to 5 Seconds
Lifting Distance: 9mm
Light-off Delay: 1
Bottom Light-off Delay: 3

Product descriptions

Preparation(s) before starting to print:

Shake the bottle for at least 2 minutes before each use.

After shaking the bottle, leave the resin to rest for 10 minutes to let air bubbles get out of the resin

The resin can be poured back from the vat into the bottle once your print is finished

Always use protective measurements like safety glasses and nitrile gloves when handling resins.

Post-processing:

We do advise you to post-process your 3D print in order to achieve the material properties;

Rinse your 3D printed object in IPA or (Bio)Ethanol for approximately 5 minutes;

An ultrasonic cleaner is preferred/recommended;

Make sure that IPA and/or (Bio)Ethanol rinsed objects are perfectly dry before further post-curing;

Place the rinsed parts in a well-ventilated area for at least 30 minutes, or use pressurized air for at least 2 minutes;

Cure your object in a high power curing chamber for approximately 20-30 minutes at 65° C;

The preferred curing wavelength is between 300-410nm.

Safety

Please always be aware that when 3D printing with resins that you should always be cautious.

Always wear Respiratory Protection when sanding/cutting the resin object.
Always use nitrile gloves when handling resins and uncured resin objects.