Technical data and information
- Diameter: 1.75 mm
- Max. roundness deviation: +/- 0.03mm
- Print temperature guideline: 185° C - 220 ° C (+/- 10 ° C)
- Print speed guideline: 40 - 80 mm/s
- Heated bed temperature guideline: 60 °C (not compulsory)
- Color: orange
- Vacuum sealed
- Melting point: 260 °C / ASTM D1003 (test method)
- Density: 1.26 g/cm³ / ASTM D1505
- Tensile strength: 28.6 MPa / ASTM D683 on 250 micron foil
- Elongation at Break: 70% / ASTM D683 on 250 micron foil
- Tensile modulus: 2100 MPa / ASTM D683 on 250 micron foil
Filaments 