RAYSHAPE ShapeCure Series

Technical data and information

Curing volume: diameter 7.87 inches × height 11.81 inches; 200 mm × 300 mm
Wavelength Curing light: 405 nm
Curing Power: 72 W
Heating Power: 300 W
Operating mode: hot air convection
Curing method multiple LEDs for 360° spatial grid; internal reflection
Control chip: STM 32 ARM chip
Interface: 3.5" touchscreen
Compatible 3D printers: Shape 1 Series / Shape 1+ Series / Shape 1+ Dental / P200 Series / P400 Series
Materials all series ShapeMaterials
Input (depending on country/region): 100~120 VAC, 5A 50/60Hz, 220~240 VAC, 2.5A 50/60Hz
Rated power: max. 450 W
Curing settings: programmable
Firmware update: via U drive
Language: English
Dimensions: 340 x 340 x 400 mm
Weight: 12 kg
Package size: 14 kg

Подробно Product descriptions

The ShapeCure series are used for final curing of printed
parts from the 3D printer to obtain the best part finish. In
the 3D printing process, the light curing reaction cannot be fully carried out, so it is necessary to use the high-powered special light curing equipment to do the final light curing of the 3D printed parts.The final curing process stops the photopolymers from curing in the UV light any further.
Leaving the customer with a final long term use part.
If you have a need for final curing of photosensitive resin 3D printed parts and models and want better part performance, the ShapeCure series is the right choice for you.

The ShapeCure series uses multiple LEDs arranged in an array around a turntable that supports the part for higher curing power and efficiency. 360° automatic rotation, refusing dead ends, all-round three dimensional product drying and curing.