Raise3D Hyper Speed PLA Filament1.75 mm, 1 kg (2.0 lbs)

Technical data and information

Basic Parameters

Material: Hyper Speed PLA (PLA optimized for high-speed printing).

Filament diameter: 1.75 mm.

Format: 1 kg (also available in a 2.5 kg version).

Density: 1.21 g/cm³.

Recommended Printing Conditions

Nozzle temperature: 200–230 °C.

Build plate temperature: 45–60 °C.

Printing speed: 50–300 mm/s (up to 300 mm/s with a properly configured Hyper Speed system).

Layer height: 0.1–0.2 mm.

Drying: approx. 40 °C before printing (recommended).

Cooling fan: enabled during printing.

Mechanical Properties (Typical)

Elastic modulus (Young’s modulus, X–Y): 2600 ± 215 MPa.

Tensile strength (X–Y): 59 ± 1 MPa.

Elongation at break: 15.0 ± 0.8%.

Flexural modulus: 2700 ± 154 MPa.

Flexural strength: 81 ± 2 MPa.

Impact strength: ~4.3 kJ/m².

Thermal Properties

Heat deflection temperature (HDT): approx. 53 °C.

Melt Flow Index: approx. 4.5 g/10 min (190 °C, 2.16 kg).

Water absorption: ~0.4%.

Подробно Product descriptions

Additional Notes

For operation at speeds above ~150 mm/s, a Hyper Speed kit is required (Hyper Speed Hot Ends + Auto Calibrator + Hyper Speed mode enabled on the printer).

The filament is suitable for prototyping, models, jigs & fixtures, and other high-speed applications.

Hyper Speed PLA is a specialized filament for the Hyper FFF® system, enabling high-speed 3D printing up to 300 mm/s with excellent surface quality and high detail. It outperforms standard PLA in fast printing by providing better interlayer bonding and higher impact resistance. It is suitable for prototypes, models, jigs, and fixtures, including large, high-precision parts. The filament is made from renewable resources and is available in various colors. Proper operation requires the use of Hyper Speed components on Raise3D Pro3 printers with Hyper Speed mode enabled.