Lynxter S300X – FIL11-FDM

Technical data and information

Print Head Configuration

2 filament print heads FIL11 – Direct Drive in IDEX
Extrusion temperature: 500 °C max
Nozzle diameter: 0.40 mm to 1.20 mm
Water-cooling

Printing Materials

All types of filaments, including brittle and flexible ones, as well as technical materials such as PEKK, PP, PETG-C, PLA, PA, TPE/TPU, HIPS, PVA

Extrusion

Single and dual independent extrusion

X, Y, Z Resolution

X-Y: 12.5 μm, Z: 1.0 μm

Build Volume

X 300 – Y 250 – Z 280 mm

Dimensions

W 1067 x L 676 x H 1006 mm

Thermal Environment

Heated build plate: 20 °C to 160 °C
Heated chamber: 20 °C to 80 °C
Dehydration unit: 20 °C to 60 °C

Layer Height

100 μm > 1 mm

Build Surface

Removable
Hot-swappable
Precision-ground surface

Maximum Tool Speed

Layer height: 100 μm > 1 mm
Resolution: X-Y = 12.5 μm, Z = 1.0 μm
Speed: X-Y = 1000 mm/s, Z = 50 mm/s
Acceleration: 10,000 mm/s²

Automatic Calibration

Print surface leveling
Tool length calibration
XY nozzle offset calibration

Control

Standalone touchscreen and web interface

Connectivity

Ethernet, online & offline – Open API

Print format

Standard Gcode

User Health and Safety

Double filtration: HEPA 14 and active carbon
Machine access lock
Intellectual property protection

Job Security

End of filament detection
Resume printing after power outage

Configurable Firmware

Customizable Lynxter firmware (based on RepRap firmware) – Simplify3D software (slicer)

Power supply

110-120V/15A or 220-240V/8A, 50-60 Hz

Electronics

Atmel ATSAME70 32-bit: ARM Cortex-M7 3000 MHz

Data

Operation traceability
Intellectual property protection

Подробно Product descriptions

DUPLICATION, MIRROR FUNCTION, SUPPORT, and DUAL MATERIAL printing of technical thermoplastics

More speed, assured quality

The S300X – FIL11 | FIL11 offers a real travel speed up to 1000 mm/s on the X and Y axes, 50 mm/s on the Z axis, accelerations up to 10,000 mm/s², and an output rate of 24 mm³/s with a 0.4 mm nozzle. It can double its performance thanks to its advanced IDEX function. The quick nozzle change process, taking less than 5 seconds, minimizes downtime and maximizes efficiency.

Advanced Thermoplastic 3D Printing

The S300X – FIL11 | FIL11 supports a wide range of high-performance thermoplastics, from PA-CF to advanced materials such as PEKK (Polyetherketoneketone).
This printer is the perfect tool for industries requiring robust, high-quality components.

A heated chamber for robust and precise parts

A heated chamber up to 80 °C with uniform temperature control is essential for maintaining consistent print quality. This feature ensures that the entire printing environment is kept at a stable and optimal temperature, reducing the risks of delamination and part deformation.

Integrated Dehydration Unit

This unit ensures high-quality 3D printing by removing moisture from filaments through active drying and closed-loop storage, guaranteeing optimal conditions to prevent moisture reabsorption during production. This helps avoid defects like stringing, adhesion issues, or porosity. An essential feature, directly integrated into the machine for optimal compactness and productivity. The unit can hold up to two 2 kg spools (maximum coil Ø300mm).

Health-Conscious Design

The printer is equipped with a closed chamber incorporating industrial-grade HEPA H14 and active carbon filtration to neutralize fine particles (particles larger than 0.3 micron with an efficiency of 99.995%) and volatile organic compounds (VOCs). This chamber is also password-protected to ensure maximum safety for the user and their environment.