Fiberlogy FiberFlex 30D filament 1.75, 0.850 кг (1.87 lbs)

Technical data and information

The following parameters are only suggested print settings for this material.

To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.

Diameter of filament: 1.75 mm

Dimensional tolerance of filament: +/- 0.05 mm

Oval tolerance: +/- 0.03 mm

Hotend: 200-220°C

Heated bed: 50°C-70°C

Closed chamber: not required

Fan: 75-100%

Flowrate: 105-110%

Printing Speed: <35 mm/s

Surface: glass, masking tape

Retraction (direct): 1-2 mm

Retraction Speed: 10-30 mm/s

Notes: To remove the print easier, it is recommended to heat the bed to 110°C

Mechanical properties	Test method	Unit	Typical Value
Hardness Shore D2240, 1 sec, 23°C	ISO 7619	-----------	30
Hardness Shore A, 1 sec, 23°C	ISO 7619	-----------	81
Density	ISO 1183	g/cm3	1.07
Break	ISO 527	MPa	22
5% Strain	ISO 527	MPa	1
10% Strain	ISO 527	MPa	2
50% Strain	ISO 527	MPa	6
Elongation at break	ISO 527	%	870
Heat Distortion Temperature @ 0.45 MPa	ISO 75	°C	70
Melting Temperature Tm	DSC	°C	170
Tear Strength	ISO 34-1	kN/m	95

Подробно Product descriptions

FIBERFLEX 30D is characterized by reduced hardness up to 30D on the Shore scale, very good flexibility and higher impact strength.

The material is recommended especially for printing tires, seals, belts and all kinds of elastic elements.

APPLICATIONS:

RUBBER ELEMENTS OF MACHINES: gaskets, elements that are frequently bent

GADGETS OR THEIR ELEMENTS: phone sleeves and cases, watch-, pulse counter-, pedometer straps

LINKING ELEMENTS: flexible hinges

TOYS OR THEIR ELEMENTS: tires, rubber figures

JEWELLERY: bands, bracelets