Grema 3D - Great Master LTD тел: +359 888 100 273
email: office@grema3d.com
3D PRINTERS / SCANNERS FDM/FFF Epitum - JL - 3D printer

FDM/FFF Epitum - JL - 3D printer
Epitum - JL - 3D printer
Epitum - JL - 3D printer
Epitum - JL - 3D printer
Epitum - JL - 3D printer
Epitum - JL - 3D printer



  • Perfect combination of double-nozzle printing and large size models.
  • High degree of defect tracking on large parts and pad flatness during printing gives the most controlled result.
  • The best solution for high volume production.
  • JetSmart System - Improved print quality and fast changeover between two materials.
  • Automation - Embedded print management systems, proprietary software, available material profiles.
  • Active chamber heating - Helps create stronger models due to better layer sintering.
  • Large dimensions - Suitable for large models and prototype devices/mechanisms.


Technical data and information

Category Parameters
Printing technology Fused Filament Fabrication (FFF)
Fused Deposition Modeling (FDM)
Nozzle switching technology Jet SmartTM (2 nozzles at 1 extruder) HotSwap
Build Volume 360 х 360 х 610 mm
Extruder maximum printing temperature 430 ºC (806 F)
Heated bed maximum temperature 150 ºC (302 F)
Max chamber heating temperature 90 °C
Print speed up to 130 cm3/h
Minimum Layer Thickness 10 microns (0.01 mm)
Layer Resolution 0.01 – 0.8 mm (depending on the nozzle diameter)
Positioning Resolution 11 x 11 x 1.25 microns
Filament diameter 1.75 ± 0.1 mm
Nozzles diameter 0.5 mm in toolkit (0.2 - 1 mm) 
Casing Aluminum composite
Frame Steel
Heated bed construction Aluminum, glass
Guides XY cylindrical (steel)
Z cylindrical (steel)
Electricity 220 ± 15%, 50 Hz
(option 110 ± 15%, 60 Hz)
Maximum Power Consumption 2,2 kW
Networking Interfaces Wi-Fi, Ethernet, USB 2.0 (flash drive in toolkit)
Printing materials ABS, PLA, ASA, HIPS, PVA, TPU, PP, PETG, PA (6/12/66), ABS (GF/CF), PC, PEEK, PEKK, PPSU, SBS, PPS, WAX and other materials, including composites with CF and GF.
Printer dimensions 650 x 605 x 1000 mm
Weight 75 kg
Software Printoformer
File Types *.stl, *.amf, *.obj, *.3ds, *.eptf



Подробно Product descriptions

Features
- Primary systems
- Filament Flow Control
- End-of-Filament Sensor
- First Layer Control
- Built-in Profile System
- Network Printing
Additional features
- Filament drying mode
- Printer status notification system
- Auto-control workability of all systems
- Surface print control system
- Build plate Leveling
- Automatic leveling