Devil Design PLA STARTPACK 1.75 мм, 6 х 0.330 кг

Technical data and information

Filament PLA thermoplastic polyester in the form of fiber used for FDM 3D printing.

Diameter of filament: 1.75 mm

Dimensional tolerance of filament: +/- 0.05 mm

Roundness of filament: +/- 0.02 mm

Shrinkage of the material Very low

Hotend: 200-235°C

Heated bed: 50-60°C

Cooling the printout: Optional

Surface of the material: Gloss

Spool - material: Transparent policarbonate

Product weight: 1.98 kg net

Physical properties of the material:

Density: 1.24 g/cm3 / ASTM D1505

Elongation at Break: 160% / ASTM D882

Spencer Impact: 2.5 joules

Softening temperature: ~50°C

Подробно Product descriptions

PLA is a biodegradable material, produced from renewable natural resources.
It is dedicated primarily to amateurs due to trouble-free use.

Filament wound on a spool, vacuum packed with a moisture absorber.

The spool contains 6x0.330 kg of net material.

It can be used in all FDM/FFF printers that are not protected from external suppliers and open source structures before using.

Due to the structural differences of printers, the above figures should be considered as guidelines for 3D printing