Devil Design PET-G STARTPACK 1.75 мм, 6 х 0.330 кг

Technical data and information

Filament PET-G a thermoplastic polymer used for FDM 3D printing.

Diameter of filament: 1.75 mm

Dimensional tolerance of filament: +/- 0.05 mm

Roundness of filament: +/- 0.02 mm

Shrinkage of the material Very low

Hotend: 220-250°C

Heated bed: 70-80°C

Cooling the printout: Optional

Surface of the material: High Gloss

Spool - material: Transparent policarbonate

Packaging: Printed cardboard

Physical properties of the material:

Specific Density: 1.23 g/cm3

Glass Transition Temperature: 80°C ASTM 3418

Moisture: ≤ 0.3%

Подробно Product descriptions

Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 6x0.330 kg of net material.

It can be used in all FFF printers that are not protected from external suppliers and open source structures before using. PET-G is a material friendly for beginners,
material available in covering and transparent colors.

Due to the structural differences of printers, the above figures should be considered as guidelines for 3D printing.