Devil Design PA12 filament 1.75 mm, 0.330 kg (0.800 lbs)

Technical data and information

PA12 filament (nylon) - semi-crystalline polyamide in the form of fiber

Diameter of filament: 1.75 mm
Dimensional tolerance of filament: +/- 0.05 mm
Roundness of filament: +/- 0.02 mm
Shrinkage of the material: Large
Hotend: 240-270°C
Heated bed: 95-120°C
Cooling the printout: Optional
Surface of the material: Satin
Spool - material: Transparent policarbonate
Weight of the empty spool: ~250 g
Packaging: Printed cardboard
Product weight: 0.330 kg net, 0.500 kg gross

Physical properties of the material:

Viscosity number (m-cresol): DIN EN ISO 307 189ml/g
Water content: ISO 15512 0,051%

Подробно Product descriptions

Filament wound on a spool, vacuum packed with a moisture absorber. The
spool contains 0.330 kg net of material. It can be used on all FFF printers that are not protected against material
from an external supplier and from an open source design. The material is characterized by high impact
strength, good resistance to greases, oils, fuels, hydraulic fluids, salt solutions and solvents. It can be used in
a large temperature range. The PA12 filament is difficult to print, recommended for experienced users of 3D
printers.