 |
тел: +359 888 100 273 email: office@grema3d.com |
|
тел: +359 888 100 273 email: office@grema3d.com |
|
Filament ASA is a thermoplastic material used for FDM 3D printing.
Diameter of filament: 1.75 mm
Dimensional tolerance of filament: +/- 0.05 mm
Roundness of filament: +/- 0.02 mm
Shrinkage of the material: Large
Hotend: 230-240°C
Heated bed: 90-100°C
Cooling the printout: Not recommended
Surface of the material: Gloss
Spool - material: Transparent policarbonate
Weight of the empty spool: ~250 g
The diameter of the spool: 200 mm
Width of spool: ~70 mm
Diameter of mounting hole: 52 mm
Packaging: Printed cardboard
Package size: ~205x205x80 mm
Physical properties of the material:
Specific Density: 1.07 g/cm3 / ASTM D792
Vicat Softening Temperature: 96°C ASTM D1525
Flammability: HB / UL 94
Rockwell Hardness (R-Scale): 107 / ASTM D785
Tensile Strength - Yield: 500 kg/sm2 / ASTM D638
Tensile Elongation - Break: 20% / ASTM D638
ASA - thermoplastic plastic in the form of fiber, used for 3D printing.
Filament wound on a spool, vacuum packed with a moisture absorber.
The spool contains 1 kg of net material.
It can be used in all FFF/FDM printers that are not protected from external suppliers and open source structures before using.
ASA is a material with increased resistance to weather conditions and UV radiation
(relative to ABS), easily subjected to mechanical treatment such as grinding or drilling, the material is soluble in acetone.
Filaments 